How To Repair Leaky Air Mattress

How to Fix an Air Mattress

This inquiry is supported past you, our readers, through our independently called links, which earn u.s.a. a committee with no extra cost to you. Learn More

Written by:

Read ten min Last updated on May 31, 2022

Airbeds are an affordable and space-saving alternative to a regular bed. All the same, fifty-fifty the best air mattress isn't immune to accidental tears and leaks.

The good thing is, yous tin can easily fix these problems, and you may non even need the patch kit your airbed comes with.

In fact, you can fix an air mattress with duct tape, superglue, or even nail smooth!

Desire to acquire more? Read on!

Preparations to Make

Whichever style of fixing a hole in an air mattress yous'll cull, you demand to prepare the mattress itself. And here are the steps you should take:

• Locate the leak. Inflate the mattress to its full capacity and seal the valve as yous'd normally practice. Then try to hear the sound of the air coming out of your airbed. Alternatively, you can make a mixture of dish lather and water and spray it generously onto the mattress. The leaking air will form foam or bubbles, allowing you lot to hands locate the hole. Once you lot have found it, mark information technology with a tailor'southward pencil or a marker and allow the airbed to dry earlier proceeding to the next step.
• Deflate the mattress completely. Any air left inside might preclude the patch or mucilage from forming a tight seal, and you'll take to repair the hole again.
• Scrub it. If the puncture is on the flocked acme of the airbed, you lot need to scrub the spot so that the patch can adhere properly. Use soft sandpaper and exercise not rub too vigorously to avoid damaging the mattress.

Now, your airbed is ready to be fixed!

And hither are five all-time means to practice it.

#one Make DIY Patch Kit

The easiest style to ready an air mattress is to glue a patch to the leaking area. Some airbeds come with an included patch kit, only what if y'all don't take one by your side?

Don't worry!

You can use any thin plastic or safety material for making a patch, for instance:

• a slice of shower drape;
• a puddle liner;
• a piece of inner bike tire (the one that's made of soft prophylactic).

And here'southward what you demand to practise to patch your airbed:

• Cut the needed amount of cloth. Ideally, your patch should cover the leak entirely and spread at least an inch to each side to ensure a skillful seal.
• Degrease the surfaces. Yous tin utilize rubbing alcohol or nail polish remover. Degreasing removes lipid residuum that may forbid the patch from adhering to the mattress.
• Apply glue according to instructions. Some adhesives need to exist applied on both contacting surfaces, whereas the others can be applied either to the mattress or to the patch. Apply the generous corporeality of gum to ensure that the seal will be tight.
• Press it down. Later on you have practical the glue and positioned the patch, press it with your manus or something heavy and hold like that at least for a couple of minutes. You may also leave the mattress to dry overnight, but to be on the safe side.

One time the glue dries, inflate the airbed and check the results of your job.

#two Use Superglue

Superglue might be helpful for patching an airbed that has a pocket-sized and thin puncture with two edges that need to adhere together , e.thousand. pocket-sized pair of scissors cut or a knife puncture.

You lot can prepare the hole in the airbed with superglue in 2 ways:

Either use it as an adhesive for a previous DIY-patch method or just clasp the glue in a higher place the puncture without any patches. You tin can utilize stitch-like motions and employ the mucilage to the puncture. Once the first layer is dry, repeat the application until the whole puncture and at least 0.5" around it is covered.

And so, inflate the mattress and bank check the leak.

Superglue is a good method for patching a mattress in camping ground atmospheric condition when you do not have a patch kit past your side.

#three Gel Nail Polish

This method requires sure preparations — you demand to have a UV low-cal source to trigger the polymerization reaction in the nail polish — just it'south pretty effective. It also works for whatever hole size, which is great.

Here's how to patch your air mattress using gel polish, if y'all accept a pocket-size hole.

• Sand the area around the pigsty , regardless if it has flocking on it or non.
• Degrease the area using rubbing booze or nail polish remover and let it dry out.
• Employ a drop of nail shine above the pigsty .
• Plow on the UV low-cal and set up it above the blast shine drop for ten-15 seconds to cure information technology.
• Echo if needed.

If the mattress has a large puncture that requires placing a patch over it, hither's how you tin can utilize this method:

• Sand and degrease the expanse .
• Cut the piece of articulate shower curtain to embrace the hole. The use of clear materials is recommended because they can permit the UV light through.
• Cover the cut slice with a thick layer of smash polish and identify it above the hole.
• Turn the UV light on and set information technology above the patched expanse for 15-20 seconds .
• Check if the patch is secured past rubbing on it.

Note that, although gel boom smoothen creates a tight seal, it'south all the same a temporary method, so you should go yourself a proper mattress patch kit.

#4 Marine Broth Gum

Marine Goop (also known under the proper name Amazing Goop) is one of the strongest adhesives you tin detect today. Marine Goop is waterproof and UV-resistant and can be used equally a sealant, which makes information technology a practiced choice for patching a leaky airbed if yous plan to utilise it outdoors.

So, the method has the following steps:

• Sand the surface and degrease information technology. Goop creates a better seal on a slightly rough surface. But don't go wild and then that you rub through the airbed.
• Use a sparse layer of Goop to a higher place the leak. Create an even seal above the puncture making certain y'all comprehend virtually half of an inch around it. Use an onetime toothbrush or fine art brush for that, and put the safety gloves on to protect your hands.
• Allow the sealant to cure. The manufacturer recommends letting the sealant dry out for 24 hours minimum, but that may vary depending on the climate or temperature in your dwelling house.

#5 Utilize Hot Glue Gun

This might sound a bit controversial, just a hot glue gun can help you lot out in patching your mattress, although this seal volition only last for about a week. So if you don't have a repair kit by your side, you lot tin can attempt this method:

• Locate the hole on your mattress and mark it.
• Place the glue stick into the glue gun and turn it on, allowing information technology to estrus up.
• Squeeze the trigger of a glue gun and dab a small blob of the hot glue over the hole, sealing it completely.
• Permit the glue to cool downward and bank check the quality of the seal past inflating your mattress.

This method works improve with small holes that don't require patching . As well, exist conscientious when using hot gum on the mattress, and don't accidentally create another pigsty.

#half-dozen Patch a Hole With Duct Tape

Finally, if you lot need to set up a hole in an air mattress without a patch kit and yous don't have any adhesive past your side, use duct tape.

Cut a piece large enough to comprehend the puncture and some infinite around information technology and apply information technology to the degreased surface.

Notation, though, that the glue on the duct tape tends to lose its grip over time , so if y'all plan to use this fix, you might end up having to repatch the hole regularly. However, it may work as a temporary solution until you go a patch kit or a strong adhesive to fix the hole permanently.

So, have you tried any of these methods? Yous're welcome to share your feel below.

Source: https://www.sleepingocean.com/how-to-fix-an-air-mattress/

Share this post